The trunk release on my '92 cab is not operating. Any suggestions as to where to start? The manual release cable in the quater panel works fine. I am not mechanically inclined so any advice is appreciated.

Views: 213

Reply to This

Replies to This Discussion

Is there any sound coming from the latch when you push the button?
Have you checked the fuse?

Thanks.  The fuse is good. There is no sound coming when the latch button is pushed.

I'm going to just assume that you have heard it when it was working. I can clearly hear the motor for tne hatch on all three of mine when I push the button.

So, there could be a bad switch, bad wiring, accidentially disconnected wiring at the motor or switch, motor is bad.

I would put a new fuse in anyway, then have someone that is mechanically inclined take a look at it.


Support Our Ad Partners

© 2024   Created by Ray Starbird.   Powered by

Badges  |  Report an Issue  |  Terms of Service