I just want to confirm so I'm not throwing parts at it again. I had to replace some door handle/lock solenoid actuator linkages. The power locks were synched and working great until I had to remove the door handle again for a minor issue. In the process, I broke the freaking wire that leads to just under the lock cylinder (on the inside of the handle). Now the power locks won't stay down bc it's detecting a short. I think the replacement is 964-613-134-00-M100 (aftermarket), it's available on Pelican for $80. It's called a "Door Lock Micro Switch" and it's interchangeable between both sides. Am I barking up the wrong tree? Can I just replace that switch without replacing the lock cylinders?  

Views: 97


Reply to This

Support Our Ad Partners

© 2023   Created by Ray Starbird.   Powered by

Badges  |  Report an Issue  |  Terms of Service